Many representatives of the fair sex love to wear silver jewelry. But over time, such products may darken and lose their attractive original appearance. In such cases, the darkened silver is usually taken to a workshop or a special jewelry liquid is purchased to clean the alloy. But both of these options require significant financial costs, so it will be useful to know some effective methods for independently cleaning products made from such metal using affordable and budgetary means at hand.
How to clean a silver ring at home?
A change in the shade of this metal and the disappearance of shine can be caused by some creams and tonics that contain sulfur ions. In addition, darkening of products of this kind is sometimes associated with excessive humidity in the room in which such accessories are stored.
The following recommendations can help return silver items to their attractive color and noble shine.
Methods to quickly clean a silver ring
In conditions of limited time, it is advisable to use one of the quick and repeatedly proven options for cleaning darkened accessories made of this metal.
Woolen cloth and chalk
A darkened ring will return to its original appearance if you rub it with a wool cloth, on which you “draw” with school chalk.
Raw potatoes
Perfectly cleans silver and removes oxide from the surface of jewelry raw potatoes. To clean tarnished silver jewelry using this vegetable, you need to follow these steps:
- Potatoes must be peeled, washed and grated on a fine grater. Add water to the resulting slurry and stir. Silver items should then be immersed in this solution (the solution can be preheated).
- After half an hour, the products must be removed from the solution, rinsed thoroughly under running water and dried.
Advice! After cleaning your silver accessories, it is advisable to polish them with scraps of clean and dry flannel, wool or suede to give them shine.
Baking soda and foil
This product has excellent cleansing properties and dissolves fats, it is perfect for cleaning a silver ring with an engraving or relief design. To clean a silver item with soda, you must proceed as follows:
- In 500 ml of water you need to dissolve 2 tbsp. l. soda and bring the resulting solution to a boil.
- It is necessary to lower the darkened silver item and a piece of food foil into the boiling solution.
- The decoration should be boiled in the solution for several minutes, after which it should be removed and wiped with a soft cloth.
Toothpaste
The toothpaste contains tiny polishing abrasive particles that perfectly remove plaque from silver items without scratching them.
To clean a silver ring using this product, apply toothpaste to a moistened brush with soft, short bristles.
Such fibers gently clean the surface of the product and penetrate deeply into the decorative weaving of the ring. Finally, the silver product must be rinsed well with warm running water and wiped with a soft microfiber cloth.
Soapy solution
You can, for example, immerse such a thing for 3-5 minutes in a warm soapy solution, after which you should carefully clean all the edges, using a toothbrush with soft natural bristles for this purpose.
Dishwashing liquid
In addition to this method, you can quickly clean silver jewelry from surface dirt using ordinary dishwashing detergent. A couple of drops of this product should be diluted in a container with warm water and lightly clean the jewelry by dipping a toothbrush into this solution.
How to remove blackness from a silver ring?
A product made from 3 components: soda, ammonia and toothpaste will help to effectively clean excessively blackened silver. These components must be mixed in equal proportions. Then the resulting mixture should be applied to the silver product with a cotton napkin or toothbrush. Wash off this mixture with cool water.
Important! The composition prepared in this way is considered quite aggressive, so when using it, your hands must be protected with rubber gloves.
It is not advisable to use such a mixture often. The abrasive particles included in the composition can lead to the appearance of microcracks in the silver.
How to clean silver rings with stones?
To restore silver jewelry encrusted with stones to its former attractiveness, you can use the following method:
- First you need to add a few drops of ammonia and shavings of laundry soap to the water.
- The resulting composition must be brought to a boil (then it should not be boiled).
- The cooled composition should be applied to the product in need of treatment with a soft toothbrush and cleaned.
- It is recommended to clean the area around the stone using a cotton swab dipped in the prepared solution.
Important! Do not use salt or acid to clean matte silver. This may noticeably damage the accessory.
Cleaning accessories made of such metal with inserts made of natural pearls, coral or amber, it is recommended to entrust it to professionals. Chemicals can negatively affect organic materials.
0
