Glasses, like many other things, require their place, but it is very important to keep them safe when carrying them. It's just that they might even break in a bag. The article has a special suggestion - to make beautiful leather eyeglass cases for them. You only need a small piece of leather to do the job, but the result is simply amazing.
How to make a case (case) for glasses from leather?
In fact, sewing is not so difficult, and even sewing cases (cases) for glasses from such a rough material as leather. If you properly arrange your workplace and have such tools at hand, a light female hand can create a couple of unusual and very elegant cases for your favorite glasses.
What materials are needed?
The most important material for such products is leather. But the use of leatherette cannot be ruled out. It’s worth taking a closer look at such pleasant little things as accessories for handbags; here you’ll also need them.
Eyeglass case "owl"
Oh, these fashion trends. Everyone wants to get unique leather models made by themselves.And this is great, because this product simply cannot be more unique. Beautiful work and also very useful. There is no danger to your glasses with them.
For work use:
- brown skin;
- chalk;
- scissors;
- needles and threads;
- soldering iron;
- hole punch or awl;
- brown zipper (short);
- acrylic paints (small sponge).
Pattern
Draw a rectangle on the skin according to the size of the glasses. Separately cut out the part for the bird's head.
Preparation
Cut out a rectangle and draw a thin line at a distance of 0.5 cm, marking dots on it every 0.5 cm. Then make holes using a hole punch or a special tool.
Lightning connection. Sew a zipper between the sides, and bend the corners slightly to create a convex shape for the bag. Sew the product a second time.
Burning
In order to get the body of an owl, you must first make a drawing, then heat the awl and carefully draw a line. You can use a special thin soldering iron.
Process the edges of the part for the bird's head using a soldering ironso that the skin is slightly rounded. Apply acrylic paints with a sponge after firing. slight gradient. So the beautiful bird is ready.
Glasses case with geometric motifs
A simple model with an unusual design approach. Very light colors for the product and cutting out geometric shapes on the canvas are also welcome.
For work use:
- light skin;
- hole puncher;
- threads and needles;
- scissors.
Pattern
Make a neat pattern according to your measurements.
Processing the edge of the product
To process the edge of the product, you will need to draw a line 0.2-0.3 cm from the edge of the pattern. Next, place points at a distance of 0.5 cm from each other exactly along the line.Then a hole puncher gets to work, making even holes for the thread in front of the seam.
Seams
Connect the piece to make a pocket and you can sew it on. This will not be difficult to do, especially after processing with a hole punch or awl. For work it will be possible use a simple forward stitch, then stitch again so that all the spaces between the holes are filled. This way the seam will turn out to be almost factory-made, and the work will be securely fastened.
Clasp
All that remains is to install the fastener. The edges of the leather can be trimmed with a lighter. For fastening, use a long strip, which is connected to the back wall of the eyeglass case.
Decoration
In order to somehow decorate this model, you can use special clippings. This cutting out geometric shapes along the front wall. Pre-draw them with chalk. But do not cut the line all the way, so that the figures do not fall out and form holes in the canvas.
Eyeglass case with zipper and applique
Cases with various patterns, ornaments or appliqués look creative.
For work use:
- brown skin;
- chalk;
- scissors;
- needles and threads;
- hole punch or awl;
- brown lightning (short);
- applique of multi-colored rhinestones (or iron-on sticker) in the shape of an owl.
Pattern
Draw a circle on the skin with a diameter of glasses length +5 cm.
Preparation
Cut out a circle and draw a thin line at a distance of 0.5 cm, marking dots on it every 0.5 cm. Then make holes using a hole punch.
Lightning connection. Sew a zipper between the sides and bend the corners slightly to create a convex shape for the bag. Sew the product a second time.
Decoration
Decorate the work owl: iron-on adhesive or glue an applique of rhinestones. If you wish, you can buy rhinestones separately and assemble your own unusual picture of an owl.
Here These three models of glasses cases will definitely decorate your glasses and will be reliable protectors for them. The master spent approximately 1 hour on each model. It’s not that difficult to sew such beautiful things, so why not treat yourself to another fashion accessory that’s definitely unique.
0
