A crochet glasses case is a nice little thing that you can easily make with your own hands. Handbags have always attracted the attention of craftsmen. Especially with new and interesting schemes, as well as different in shape. They represent a whole thread of individual works, each more beautiful than the other. The article contains two models of such stunning cases that will happily store glasses and amuse the owner with their bright colors.
Selection of yarn and hook
For the case, as for any other handbag, you can use a variety of threads. Everything is only what the master himself wishes. These are not children's products; they can be made from different fibers. The main thing is that the work pleases the owner and lasts a long time.
The hook is selected according to the thickness of the strand. But there are exceptions for some patterns. For example, for a lush and voluminous openwork, the master can use a hook a full 2 sizes larger.
Types of patterns
If the product is without an additional frame, then it is advisable to use dense patterns. But with the frame you can have fun with both openwork and very delicate works. Case examples:
Anything that is used to make things can always be used for handbags. Even a crochet elastic band has been used more than once for such work.
How to crochet a glasses case?
Crocheting a cover is not as difficult as a beginner might think. Moreover, the work presents two models at once. You can easily navigate them and create a bright and simply stunning product with your own hands.
Glasses case with flap in bright colors
A very juicy product for glasses. With them, your glasses are reliably protected, and your mood will improve from such work. And the use of simple and quite popular schemes simply will not allow craftsmen to get confused when creating another masterpiece.
Useful for work:
- yarn of different colors;
- hook according to the thickness of the thread;
- old case.
Measurements
Measurements can be taken from the old case. Measure all sides.
Sample
Complete a small project, but be sure to follow the work plan with double crochets. Then apply a small ruler and determine the knitting density for the product. To do this, you will simply need to calculate how many 10 cm double crochets there are, and how many will be there in 10 cm rows.
Next, a proportion is compiled and an unknown variable is calculated, which reflects the number of loops for a row of the corresponding measure. With a length of 20 cm and a density of 40 stitches per 20 rows, you get an indicator for a length of 80 single crochets.
Canvas
For the sides you will need to knit small squares. Knit and use basic scheme. For the sides you will need to make two squares. For the front part you will need to make a small rectangle.
Valve
The valve of this model has a slightly rounded top, and therefore will require knit a semicircle – this is half of the proposed scheme.
Assembly
To assemble, sew on the parts using neat stitches.. Place with a button it is better to glue it additionally. So that the cover does not seem so dimensionless, you will need to make small stitches in the corners of the sides along the upper edge closer to the front wall. The result will be a small assembly along the side walls.
Crochet case for glasses “Owl”
The most unusual and very stylish glasses case. This kind of work deserves respect. But if you break down all the details into parts, then even a beginner can handle such a new product.
Use in your work:
- yarn of different colors for “Owl”;
- hook according to the thickness of the yarn;
- eyes for a toy;
- glue for gluing eyes;
- needles and threads;
- clasp clasp
Measurements
Measure the length and width for the cover.
Sample
Follow the main pattern of the canvas, and this will be double crochet, small product. Small, but enough to take measurements. Required first measure the knitting density, and then determine the number of loops across the width. Keep in mind that the work will be in circular rows, and therefore take only two width sizes for the calculation.
The basis
The basis of such an “Owl” will be a cylinder with a bottom. Such lovely work begins from amigurumi loop. And here the most interesting thing happens. Everyone is used to working after a loop only with single crochets, but here immediately start using double crochets. Work with gradual expansion using double crochets until the desired size is obtained. Tie almost to the length of the case. Count on the bird's head.
Head
The upper part is a darker colored thread. Use for her circles according to the double crochet pattern. Tie half the work shells. The work will require 4 such parts at once. This is the head, it has two parts for the front and back. And the bird's wings are 2 parts.
Beak
Make a bright beak, and also use an amigurumi loop for it, but already a familiar technique with single crochet. Knit several rows with good increases.
Eyes
Complete everything two circles for the eyes with double crochets. Make the middle blue, the edge white.
Small parts
For claws use simple stripes, from 4-5 single crochets. In total you will need to make 6 such small parts.
Feathers
Now comes the most interesting part of this work. And this is the mystery of the whole work. How to do this unusual belly for a bird. And there is nothing complicated here, in fact it is an ordinary thread from single crochets.
Knit a very long cord and use multi-yarn for work. Then just carefully roll it up and sew on such an unusual flagellum for a product.
Assembly
The most important thing in this work is even sewing. Therefore, you should not perform assembly if the master is tired. It is better to postpone this matter and sew it smoothly and beautifully later.
Convenient sew on the wings first, the beautiful clasp does not yet close the top, and allows the hand to deftly penetrate into the middle of the product.
Next, carefully lay out the feathers with a cord and sew on the claws. Sew in clasp clasp and blanks for it, tuck the bottom of the blank, and crochet eyes, later glue the top eyes for the bird. Sew on the beak last.
Now the work is ready. The new product can only be improved by additional lining and cord for hanging such a cover.
Cord for case
The cord for the case can be made using single crochet and double crochet. To do this, you will first need to make a set of loops along the required length of the lace. Then knit a row according to the pattern.
Pattern Schemes
Below is a small selection of diagrams for making a case for glasses.
Simple and at the same time pattern with small crochet weaves.
Lush buds make up a very unusual pattern from a series of fantasy ones.
Canvas with squares would be perfect for a case.
Lace for handbag - it’s just a celebration, especially if you have a dense frame of a beautiful color at hand.
With these patterns you can make a case for glasses with any clasp.