Bra pattern

bra patternA woman's wardrobe consists of a large number of irreplaceable elements. The most significant is the bra - an important product in the lingerie department. Despite the wide range available on the market, choosing the right model is sometimes very difficult. By wisely using a few simple tips, you can sew a bra yourself. Let's look step by step how to do this correctly.

Material selection

The first step is choosing the fabric for the bra. When sewing underwear, it is recommended to use natural materials that will provide the necessary air flow and quickly remove moisture.

Natural textures can be replaced with synthetic material. When choosing synthetics, focus on high-quality air flow, elasticity and strength of the fabric.

Suitable material:

  • cotton;
  • chiffon;
  • atlas;
  • silk;
  • microfiber;
  • elastane.

Proper ventilation and quick elimination of excess liquid are the main criteria when sewing underwear. Low-quality materials do not cope with the task.This can lead to skin irritation and allergic reactions.

An important position is occupied by the stretchability and elasticity of the fabric. If the material is pulled too tight, it will cause discomfort when using the bra. When purchasing, fold the material in half and pull lightly. This action will help you choose textures suitable for sewing.

Attention! This rule also applies to the selection of fabric for sewing a swimsuit top yourself.

Preparatory stage

materials
After purchasing suitable fabric, we proceed to preparation. With proper preparation, the process will go faster.

Materials and tools

To work you will need to prepare:

  • fabric for sewing;
  • sewing meter;
  • pencil;
  • paper;
  • scissors;
  • safety pins;
  • sewing machine;
  • lace for finishing (optional);
  • set of length regulators;
  • a set of seeds (optional);
  • fasteners;
  • calyxes;
  • elastic band for straps.

Installation of seeds in cups and their placement, decorating the surface of the product with lace depend on personal preferences.

The number of fasteners can vary from one to four or more. Nowadays bras of this style are gaining great popularity bralette - a lace model with no cups. Many pieces resemble a top that would be suitable for an open blouse or a sweater with a wide neckline. You can use your skills and sew this wardrobe item.

Advice. It is recommended to install at least four fasteners (two in two rows). This will help you adjust the volume if necessary.

Taking measurements

measurements
Successfully completed work directly depends on the accurate taking of personal parameters for creating a pattern.

For correct calculation you need to know such data.

  • Bust, which is measured along the center.
  • Underbust circumference We measure under its base.
  • From the larger indicator, subtract the smaller one. The result obtained is the required cup size for the underwear.

For an accurate determination, a table of indicators is attached.

cup size chart

Bra details

Each product has special details: hooks for fastening, straps, length adjusters, a belt under the cups. Most bras also have hooks that allow you to remove the straps if necessary, foam cups to add extra volume, and underwire to support the breasts.

When choosing adjusters and hooks, be guided by the thickness of the elastic band for the straps. Foam inserts are presented in large quantities. For those with small breasts, inserts with a push-up effect are suitable, creating additional volume..

Important! Before purchasing foam cups, you need to set your personal parameters so as not to make a mistake with the size.

Hooks for attaching straps are attached at personal discretion. Many products presented in specialized stores come without these elements. A similar rule applies to bones. They help lift the breasts and maintain their position.

Constructing a pattern

Patterning is one of the most difficult processes when sewing underwear. At the initial stage, in the absence of appropriate skills, it is recommended to build patterns on paper, and only then transfer them to fabric. This will help avoid wasting material.

Calyxes

The initial step is to build a block of cups. To do this, two triangles are drawn according to the dimensions that were obtained earlier.

cups

We round the corners, forming the necessary base. If the bodice is sewn in one piece with straps, from the top corner we outline the approximate location of the straps.

Back

Let's move on to the back. Here you need an indicator of half the girth under the chest. Most often, the back part consists of two halves, which are attached to each other with special hooks. Don't forget that one half overlaps slightly with the other.

Reference: The model can be made without fasteners.

details

Bottom

The bottom can be complemented with a belt. This will require half the circumference under the bust. Draw a horizontal strip of the required width. During the sewing process, the belt is connected to the back, back.

Sewing requires 2 blanks for each cup and back, belt. The bottom can also be padded. In this case, two parts are needed for the belt.

Addition: These patterns can be used when sewing a bodice for a swimsuit yourself.

Another pattern option is based on a rectangle.

pattern based on a rectangle

Step-by-step instruction

sewing
After constructing the pattern, we move on to the technological process. To do this, cut out blanks from paper and transfer them to fabric. We cut out ready-made patterns from the material. Mark the stitch position with chalk or pencil. This will help when sewing.

We fasten the halves of the cups from the wrong side and sew them with a zigzag seam. The inner side should be temporarily left without a seam if the finished bra will have underwire and foam pads. We install the necessary parts and carefully sew up the edge.

After processing the cups, we move on to the belt and back. If the parts are separate, they should be sewn together. On the finished product, this stitch will be located on the side, near the chest. We fasten the parts with pins and sew them on.

Removable straps require a special loop into which a hook is inserted. It is located on the top of the cups. You can sew it from leftover material. For the straps themselves, we use an elastic band or ready-made accessories, which can be purchased at a craft store. We install the hooks and sew the halves together.

Finally, it remains to determine the location of the fasteners. If you do not have the necessary skills, it is recommended to sew an item of underwear without fasteners. To install them, you should mark the location of the hooks on both halves of the back. The fastenings are placed on a separate piece of fabric equipped with several pockets. Mark the base on the remaining fabric and cut it out. We make several overlays that serve as pockets. We sew them overlapping, placing hooks inside. On the other half of the back we make a small tab for the hook.

The bra is ready for use. For additional decoration, lace, beads between cups, and rhinestones are suitable.

Useful tips

adviсe

  • Measurements must be taken on a naked body. When taking measurements on clothing, you may get incorrect measurements.
  • When creating a pattern, do not forget about seam allowances. If you have no experience, you should leave about 1 centimeter.
  • For proper tailoring of the product, you can make a rough version. To do this, we use ready-made patterns cut on unnecessary fabric. The parts should be basted and tried on. This will help to correct the final model and work on errors.
  • Before actual work, it is recommended to decate the fabric. This will help prevent the laundry from shrinking after washing.
  • When sewing a bodice made of lace material, pay attention to the location of the lace.

Each girl has special requirements when choosing underwear. The bra occupies a separate position.It should not only have an attractive appearance, but also be convenient and comfortable to use. Sometimes it is difficult to choose the right product that will meet all the requirements and meet personal parameters. Using a few tricks, you can sew a bra yourself. The finished linen will be original and meet the required characteristics.

Reviews and comments
IN Vika:

I liked your magazine for its interesting material, for its complete, high-quality presentation. + to subscribe. My grandmother personally taught me to sew, she kept repeating all the time: a girl must be smart, she must love to read, and be able to cook and sew! Otherwise, no one will marry her. But sewing a “bust” seems like the wildest extreme to me. It’s easier to buy without bothering!_But as a marker for the future in our unpredictable country, many thanks to the creators of the article for this!!

M Margarita Ivanovna:

“The initial step is to build a block of cups. To do this, two triangles are drawn according to the dimensions that were obtained earlier.”

Triangles are drawn according to the dimensions that were obtained earlier; it is not clear what dimensions were obtained earlier? What are the dimensions of the triangles?

Materials

Curtains

Cloth