Pattern of women's lace panties

Lace lingerie is not just clothing, it is a way of self-expression. A woman wearing lace panties feels confident and liberated. There can never be too much of this kind of underwear! Prices for a good set can be comparable not only to an evening dress, but also to a small car. We will create beauty ourselves, especially since it is not at all difficult.

Selection of lace for women's panties

Women's lace panties can be sewn from various materials:

Guipure beautiful, but practically does not stretch.

Natural lace with tulle base. Ideal, but extremely expensive. Luxury underwear is made from it.

Elastic polyester lace. Not suitable for daily wear due to its synthetic nature. Another option is to use a cotton gusset in such panties.

Types of lace panties for women

Exists strict classification of women's panties, There are main types, as well as their varieties.

Thong especially loved by young people:

G-string – the waist is low, there is a small amount of fabric along the back at the top of the panties.

V-thong – repeat the shape of the letter “V”.

T-thong – almost all the material is in the front of the panties, along the back there are only ropes forming the letter “T”.

C-thong – there are no side panels and no fastening at the waist. They are held in place due to their shape and special dense inserts.

• Classic briefs.
• Bikini.
• Brasiliano.

• Tanga.
• Shorts.

• Maxi briefs.
• Shapewear.

• Trousers.

size table

Various methods of measuring women's panties are accepted, these are the known Russian sizes, American, European. They are all slightly different.

The size range of panties is based on the volume of the hips.

Step-by-step construction of a pattern for women's panties

Measurements:

• Waist circumference (WB). Or the girth along the expected upper edge of the panties.
• Hip circumference (H).
• Width of panties along the side seam.
• Front height of panties.
• The height of the panties at the back. Seat height.

Model 1 slips/tangas

Details:

• Front part – 1 piece with fold.
• The back part is 1 piece with a fold.
• Gusset – 2 folded parts.

Required:

• Elastic lace – 0.5 m.
• Elastic band.
• Cotton jersey for gusset.

Progress:

• We build the pattern based on the waist circumference, hip height and seat height (see image.) The hip circumference is not so important to us, since our panties sit above the hip.
• The first picture shows the usual pattern of slips, the second shows an example of modeling in the simplest high thong with half-closed buttocks.
• We construct half the front and half the back of the panties, using ¼ of the waist circumference.
• The pattern is given for size 48, but you can model a pattern in your size by analogy.
• We start from the corner on the left side - point T.Starting from the T mark, move down the seat height and the length of the gusset LL1, equal to the circumference of the hips divided by 10. From the T, L, L1 marks we draw parallel straight lines horizontally.
• From mark L1 horizontally to the right we set aside 1/4 OB according to the measurement minus 1.5 cm - point B. From mark B we draw a line vertically upward - to point B1.

• The segment B1B2 is equal to the height of the thigh.
• From point T we put 1/4 OT to the right - point T1. We connect marks T1 and B2.
• Top edge of panties. From mark T we lay down 7 cm, from point T1 along line T1B2 - 6 cm. We connect points T and T1 with a straight line.
• Panty side. This is a segment T2T3 = 4 cm. We can choose a different value.
• Gusset. To build this part and move its seams, we need to find the L1 mark and from it we set aside ¼ of the length of the finished gusset. By the way, it is equal to 1/10 of the circumference of the hips, minus 1 cm.
• We have received marks, from them we draw straight horizontal lines of about 3.5 cm to the right. After which, we connect new marks with the previously obtained point T3.

Now let's start drawing a tanga - special panties with a high hip line:

• From marks No. 3 and 5 we set aside about one cm up and down. We connect smoothly.
• We raise the upper edge of the back by about 1.0-1.2 cm, and, on the contrary, lower the front by the same amount.
• We move the side of the panties to the right by about 1.5 cm, and the front, on the contrary, by 1.5 cm to the left.
• We model a smooth front line. We divide the additional line in two, putting about 5-5.5 cm up from the resulting mark. We draw a smooth line.
• We model a smooth line of the buttocks. We divide the additional line in two, set aside about 0.5-1.5 cm from the resulting mark. Draw a smooth line.
• Making a gusset. From the bottom edge of the narrow part of the panties 7-8 cm higher, draw the outline of the upper part of the gusset. We cut it out separately.

Model 2 – T – thong

Pattern:

• Half front – 2 parts.

Required:

• Lace - flaps.
• Elastic tape – 1.2-1.5 m.

Progress:

• We cut out two triangles that will be located in front. To do this, half measure the required width of the closed area of ​​​​the panties along the front. Then we divide in half.
• We build a right triangle in which the larger leg is equal to the height of the panties along the front, and the smaller leg is equal to half the width.
• Connect the dots with the hypotenuse. The resulting triangle is our pattern. We will need 2 parts.
• We cut out blanks from lace.
• Sew along the center seam.
• We process the seam with an overlock stitch.
• We measure the required amount of tape at the waist and from the waist to the beginning of the narrow part of the panties.
• Let's cut it off.
• We sew on the machine, leaving the fastenings. The band is sewn to the front of the panties using an elastic seam.
• We sew a braid at the back or, as in the picture, decorate it with a flat ring.

Other patterns for women's panties

A few more ready-made patterns and methods for constructing panties:

• classic;

• tall.

Cut on fabric

We place on the material, taking into account the elasticity of the material:

We also take into account the lace edge; as a rule, we place it on the top of the panties, or along the edge of the sides on the buttocks.

We shallow it, do not forget the seam allowances of 0.5 - 0.7 cm. If your material frays a lot, make a slightly larger allowance.

How to sew women's lace panties?

Stages of work:

• We sew the edges of the gusset with an overlock stitch.
• We fold a “sandwich” of two parts of the gusset and the front part of the panties so that the cut of the main piece is between the folded gusset allowances.

• Secure with pins.
• Let's grind.
• We fold the panties, and now our task is to insert the cut of the back part between the gusset parts in the same way.

• We fix it.
• Let's grind.
• We process the edges around the legs in a convenient way. If you have a lace edge there, then leave it as is.
• Sew the side seams of the panties.
• Fold the top edge.
• Sew an elastic band to match the lace.
• Let's try it on.

Caring for lace underwear

Hand washing is recommended, and if machine washing, then in the gentle “delicate”, “hand wash”, “silk and wool” mode.

Wash with liquid detergent, preferably for delicate fabrics.

Important! Dry outdoors, but not in the sun. Ironing is prohibited.

Sewing panties alone without a gusset takes about 30 minutes; a gusset sewn according to all the rules on both sides increases this time by 15-20 minutes.

It is best to sew several pairs of panties at the same time, performing operations in parallel. In a couple of hours, you will become the owner of 4-5 panties, of excellent quality and completely exclusive.