Water for the iron: what to use for ironing with a steamer, recommendations

 

img-1-04_large

prom.ua

A high-quality iron is quite expensive, so equipment owners worry about how best to use the device so that it lasts as long as possible. Almost immediately after purchasing the equipment, the question arises: what kind of water should be poured into the iron? Most people look for the answer to this in the manufacturer's instructions. On the one hand, this is correct, but some of the rules given remain a mystery to many. For example, when asked whether distilled water can be poured into an iron, manufacturers unanimously answer in the negative. Although it is distilled water for the iron that seems to be the most suitable and clean.

Why you can’t use distilled water in an iron - what kind of water to pour into the iron

The user manual strictly prohibits the use of this type of liquid for a household assistant. At the same time, tap water is the main reason why scale appears on heating appliances. It contains large quantities of salts.Distillation purifies the liquid from these trace elements almost one hundred percent. Why distilled water is not suitable for an iron, can it be used - typical explanations from the instructions:

  • The absence of salt in the liquid increases the temperature at which it boils in the device. This reduces the rate of evaporation. The load on the evaporation chamber increases, which leads to its rapid wear. Therefore, you cannot use distillate.
  • Some salts increase the pH level. Complete cleaning helps increase acidity. Corrosion develops at an accelerated pace. This liquid is not suitable for ironing.

Each argument presented by manufacturers can be challenged based on logical and scientific justification:

  1. An increase in the boiling point by half a degree Celsius cannot affect the technology. The distillate does not have time to boil inside the device. Reaching the heating element, heated to 160 degrees, it immediately becomes steam.
  2. The proportion of acid increase, according to many studies, does not exceed 1/10 percent, which cannot in any way affect the functioning of the heater.

Experts advise using distillate without hesitation. It is able to increase the operating period significantly. But before use, you should add regular tap water to it in a ratio of one to two.

What kind of water to pour into an iron with a steamer - water for ironing clothes

imagetools0-302

tehnika.ua

Answering the question of what kind of water can be poured into the iron, experts also recommend using two types of steam sources:

  • Demineralized. This is a special product for refueling equipment with a minimum salt content. To obtain it, a special technique is used - deionization. Consumers are offered a choice of flavored water for irons and an unflavored concentrate.The first option contributes to the appearance of a slight odor. It will remain on things for a long time after ironing. However, demineralized products cannot be used without adding regular water. The ratio is indicated on the container. This type of water for the iron will definitely not contribute to the appearance of scale and will not stain clothes. However, it is quite expensive.
  • Filtered water for ironing. For those who doubt what kind of water is best to pour into the iron, this option will certainly be the solution to the problem. Complete purification from salts and heavy impurities is ensured by modern filters. At the same time, some minerals remain in the composition, promoting harmless, rapid boiling. Scale does not appear. Another plus is the affordable price. It is always in the house, no need to go to the supermarket. But you should constantly monitor the filter. Any system - three-stage or based on reverse osmosis - equally requires replacement.

In addition, low-quality eau de parfum for irons can cause stains on things. Therefore, it is not recommended to buy products at too low a price. Products in the mid-price segment almost always meet quality standards. When talking about what kind of water to pour into the iron, you should also take into account the hardness of the water. It differs depending on the region. Sometimes the dilution proportions of the distillate and mineralized product may change.

Why you can’t put distilled water in an iron - a marketing ploy by manufacturers

Manufacturers are interested in their products being sold in large quantities. This is a known fact. If the equipment starts to work worse or breaks down completely, you have to buy a replacement.That is why, when asked what kind of water to pour into the iron, the instructions often answer: ordinary liquid from the tap. What does this lead to:

  1. When moisture hits the heating device, it instantly steams. The remaining scale after this process accumulates and then breaks off. The device begins to work significantly worse, as the steam outlets become clogged. If scale debris gets into the spray system area, it will break down.
  2. The heater overheats due to sedimentation, which leads to a reduction in service life;
  3. When steam is applied, scale may fly out of the holes. The item will be damaged by stains.

In any case, using a water source for an iron filled with salts and impurities will speed up the purchase of a new device. It has been proven that a high-quality iron can last up to ten years when working with distillate. The plumbing will fail within two to four years. This is where manufacturers have such a negative attitude towards distilled liquid.

What kind of water should be poured into the iron - do-it-yourself water for the iron

An original idea is to make a scented filler yourself. It’s quite simple, but when using the product, you can be confident in its composition. Ingredients:

  1. Demineralized or distilled liquid, diluted in accordance with the proportions - six hundred grams.
  2. Alcohol or vodka – eighty milliliters.
  3. Essential oil – optional, twenty to thirty drops. Pink, mint, jasmine, rosemary and others are suitable.

Take a glass bowl. Pour all the ingredients into it and mix thoroughly. We leave the resulting solution to infuse for seven days. It should be in a cool place, protected from light. The shelf life of the product received is one year.Homemade tincture leaves a wonderful smell and has a wonderful effect on human health. Essential oils soothe, relax the body, and promote healthy and sound sleep.

Reviews and comments

Materials

Curtains

Cloth