How to lubricate a zipper on a jacket?

Many of us are familiar with the situation when, leaving the house in the morning, you put on outerwear or shoes, and the zipper is stuck in the middle and does not move. In a hurry, we get nervous, start to pull it with force, and end up tearing off the slider or deforming the teeth. Repairs threaten you with being late for work, ruining your mood and the need to buy a new thing. Let's look at the reasons for this unpleasant situation and effective ways to quickly eliminate it.

Tight zipper on a jacket: reasons

There can be several reasons for a zipper jamming:

• the slider is tight, there may be slight displacement or pressing of one of the sides;
• adhered foreign small substances, for example, washing powder, dirt, a piece of foliage;
• getting lining fabric or threads into it;
• skewed slider on the lock snake;
• deformation of one or more links;
• undesigned zipper on new wardrobe items and accessories.

How can you lubricate a zipper if it gets stuck?

If the purchased product has not been worn by anyone, and the clasp refuses to work properly, do not rush to take it back to the store. This minor problem is easy to fix when you have the right lubricants on hand.

Metal

To develop a metal zipper, the best and most basic method would be polishing with a pencil lead. Move it along the ledges, after which the sliding of the slider will improve.

Traditional methods also suggest using lubricant with lard or camphor oil, but they are not applicable everywhere. They can be used to try to revive the zipper only on leather jackets and coats.

Plastic

Perfect for a plastic lock stearic or wax candle and dry soap. It is necessary to carefully connect it and rub it on the wrong side several times with soap or a candle. Then shake off the excess and try opening and closing the plastic fastener several times.

Kapronova

All the above methods are applicable in this example. But the most optimal would be to purchase a special silicone based products, sold in stores, which is suitable for all types of zippers. It comes with an applicator brush, which makes the work much more comfortable. This type of fastener is the most vulnerable and requires a more delicate attitude.

On the forums, some girls suggest using hairspray. It leaves no traces behind and disappears quickly.

Important! Before using it, try it on a small fragment to avoid damage to the product.

Precautionary measures

Important! Before carrying out the above manipulations, you should first make sure that there are no foreign objects on the teeth or getting into the lining slider.

1. If you find stuck dirt, take a toothbrush moistened with water and carefully remove it. If it is inside the device, you can remove it with some sharp object: a needle or the tip of a knife.
2. When the slider has stopped, under no circumstances no effort required to move it. So you can permanently fail, after which it must be completely replaced.
3. If the slider is bent, it will need to be removed. To do this, remove the upper stoppers without damaging them, since installing them back will be problematic. The slider can be purchased at a retail chain or removed from an old unnecessary lock.
4. Plastic snakes can melt when ironing clothes with a hot iron, so Avoid their contact or cover the lock with a thick cloth.

We hope that these tips will help you restore the zipper defect and maintain its functionality for a long time, without resorting to the services of a workshop or returning the purchase to the store.