The metal button on jeans is installed by the manufacturer using a special device. Therefore, changing it at home can be problematic. This is due to the fact that it is not sewn on like regular hardware. However, even such heavy-duty fasteners often become unusable and require replacement. This happens especially often if the metal rivet is located on the waist line and is constantly exposed to increased loads. What to do and how to replace the iron fastener on a denim product yourself, we will consider in this article.
How to install a spare button yourself
To properly insert a new rivet into a denim product, you need to decide on its diameter and type. There are several sizes of fittings for denim trousers. You need to choose one that fits the existing loop.
Depending on the type of fastening and the type of stud on which the button is installed, the following types of fittings are distinguished.
- With a round notch.
- All metal with smooth base.
- Smooth metal hollow inside.
Important! The best option for everyday jeans is a button with an aluminum shank. This metal is strong and stable. But at the same time, it is much easier to work with than with steel models of fittings.
Installation methods
Depending on the type of fastening, their installation method also differs.
Buttons on a stable foot
This is the simplest option that can be used at home.
- To install, you need to make a hole in the denim with an awl, nail or hand punch.
- Then a fastening nail is inserted into the hole.
- The button head is driven into it like a regular nail. The main thing is not to use too much force, otherwise the fittings can be damaged.
Denim rivets on a stable leg with a hole
Installation is carried out on a smooth all-metal nail, similar to the first method. However it will have to be shortened first. Since in most cases it is slightly larger than expected and protrudes above the attached button.
Broken leg mount
Such fittings must be installed on a strong wooden surface.
A metal tubular or regular smooth nail is used. It is quite difficult to maintain alignment during installation, so you will additionally need a bolt and a tube about 10 mm long.
If available, you can use a socket wrench. The rivet is driven into its proper place and the quality of installation is carefully checked. To do this, you need to pull it in different directions so that it does not jump out.
Fittings on a broken leg with a hole
They are installed on a solid metal nail, preferably aluminum.It is also possible to use a tubular metal nail.
We need a flat, level surface. The fabric is pierced with an awl and a nail is inserted, then the button is hammered onto the nail. It is much easier to do this if the nail has a circular notch.
Double fastening rivets
The main difference is the flat mounting base. It is pierced using two nails, which are part of the fittings themselves. And then the spikes protruding from the other side are bent towards each other to make the task easier and make the installation more accurate. First, use an awl to make two holes in the denim.
Important! When installing a button, you may find that the stud is too long in relation to the fabric. In this case, it can be easily shortened using pliers.
If a person does not have the necessary skills, tools or a lot of patience, it is better to contact a professional studio or workshop. Here, using special equipment, the rivets will be quickly and accurately restored into place.
If you want to do everything yourself, you should first study all the replacement technology and the types of fittings used.
What and how to replace if there is no spare button
If you have no desire or opportunity to tinker with new metal rivets, and also do not have the means to contact a professional studio, it is quite acceptable to replace the rivet with a regular button. The main thing is that it matches the overall style of the product and is suitable for the diameter of the loop.
- In order to sew a button on jeans, you first need to remove the old rivet.
- Then the hole from the fittings is carefully mended, leaving no unsightly holes.
- A button on the leg is sewn very close to that place.
In some cases, such fittings hold much more securely and look more attractive than standard metal rivets.
0
