Many wardrobe items lose their original shape and attractive appearance during the washing process. This rule can also apply to a hat - an indispensable accessory in cold weather. Using several methods, the product can be returned to its original appearance.
How to plant a stretched hat
The best way to return the hat to its normal size is by washing. Detergents and water temperature should be selected depending on the material from which the product is made. Therefore, before washing, you should carefully study the composition indicated on the label.
The final result depends on proper drying. There are also a few guidelines to follow here. With the right approach, the hat will easily take the desired shape.
Washing options
The stretched cap can be washed either by hand or in a washing machine. However, the second method is not suitable for every product. It all depends on the material of the headdress.
Important: The label indicates the textures used and acceptable washing options.During the process, you must strictly adhere to the specified parameters.
Woolen Can be washed in a machine or by hand. For the manual method, we fill a deep basin with water at a temperature 20 degrees higher than indicated on the label. Now the hat can be soaked in water for about half an hour, and then washed in the usual way. After washing, be sure to rinse in cold water.
For washing, the washing machine is set to the “wool” mode with a suitable temperature (30-40 degrees). During the process, it is recommended to additionally use a gel-like product suitable for woolen items.
Cotton materials Most often used for sewing children's products. Cotton is distinguished by its elasticity and quickly deforms. The material can be easily returned to its original form.
The manual method is easy and simple to perform. The headdress must be placed in a basin of hot water and left for at least 15 minutes.
You should watch out for colored items as they may fade. In this case, it is better to use a washing machine. We set the temperature no higher than 60 degrees and the maximum number of revolutions. This type of washing quickly transforms the hat into the desired shape.
Advice: In most cases, steaming an iron for a few minutes is sufficient for a cotton hat.
Many hats for warmer periods are made from synthetic materials. In this case, returning the product to its previous shape is very simple.
For washing in a machine, the “cotton” mode and the maximum number of drum revolutions are suitable. During the procedure, you should avoid using additional detergents (powder, conditioner or gel).
When washing by hand, it will be enough to soak the hat in ice water for several hours. Then dry thoroughly. This will help reduce the product by at least one size.
Suitable means
When washing (by hand or machine) cotton and synthetic materials, it is recommended to avoid using professional products. The volume reduction procedure should only be carried out with a clean product.
To wash a woolen hat, it is recommended to add a little gel suitable for such products. If you don’t have this product on hand, you can use regular liquid soap. You should avoid using powders with enzymes or chlorine - they can damage the structure of the wool fiber.
Proper drying
Proper drying contributes to the final result. If done incorrectly, the product can be stretched even more and damaged.
After washing, the cap should be carefully wrapped in a thick terry towel to absorb excess moisture. Squeezing and hanging the product on clothespins is strictly prohibited - the fibers will stretch even more. After treatment with a towel, the hat should be placed on a horizontal surface, under a dry cloth. Dry naturally. Such actions will contribute to the natural shrinkage of the product.
Healthy: A damp mohair hat can be placed in a bag and placed in the freezer for several hours. After drying, the material will be more fluffy and voluminous.
Conclusion
A hat is a basic and indispensable accessory in cool weather for almost every person. If not properly cared for, you may experience stretching and loss of shape of the product. A few simple methods and recommendations will help correct the situation.
0
