Such an indicator as a crotch seam can often be found in finished products of popular brands. A crotch seam is a stitch that connects the front and back pieces on the inside of the leg. It starts from the extreme point of the product in the groin to the edge of the trouser leg. This parameter determines the length of trousers or jeans and is very useful when choosing products “blindly”. It is enough to take this measurement to know exactly how short or long the chosen model will be, and whether it will need to be hemmed in the studio.
Sometimes the definition of “low crotch seam” or “low
th crotch seam.” In everyday life they are called: trousers with “trousers”. Such products sit very loosely in the groin. These are the following models: joggers, afghanis, baggies, aladdins, zouaves, shalwars and bloomers.
There are height marks on trousers, which immediately set the limits for the length of the inseam:
- K – short height, up to 165 cm. Inseam length – about 75 cm.
- N – average height, in the range of 165-172 cm. Inseam length – 81 cm.
- L – tall, from 172 cm. Inseam length – about 88 cm.
How to measure your crotch
The measurement is called VShG (crotch height). There are two ways to find out your VShG length: take a perfectly fitting product or take your own measurements. In the second case, you will need the help of another person. But this method will give a more accurate figure.
On the finished product
The first step is to choose pants that fit perfectly. Some should not be loose, the model should fit well. At the same time, you should not take products made from bi-elastic or elastic fabrics that stretch greatly to fit your figure - they will not give an accurate picture. The length of the selected trousers should be ideal - to the ankle, not higher and not lower. Sequence of taking measurements:
- Fold the trousers in half as before ironing.
- Spread them out on a flat surface so that there are no folds or creases.
- Place a measuring tape and place its beginning at the intersection of the internal seams.
- Pull the tape straight to the end of the trouser leg.
- Record the result by pinning the tape with a pin.
- Check again how evenly the product is laid out and whether the measuring tape is well stretched.
You can measure the same parameter without unfolding your trousers. It is enough to take the product with the fingers of one hand by the edge of the trouser leg, and with the other hand instead of crossing the groin seams, while simultaneously holding the tailor's tape in your fingers. Stretch the product with the tape well, look at the extreme value on the tape.
On a person
The measurement is carried out over tight tights, tights, leggings. Measurements over underwear will give an underestimated figure, measurements over trousers made of thick fabrics will give an overestimate. Therefore, choose thin, well-fitting pants. How to measure:
- Go to the wall, turn your back to it, touching four points: heels, buttocks, shoulder blades and the back of your head. In this position, the person stands as straight as possible, with a slender and straight back.In any other position, the measurement will be distorted.
- Your legs should be slightly apart.
- The edge of the tape is placed at the beginning of the inner stitching, at the intersection, near the groin.
- The tape goes down along the leg to the floor.
To get a more accurate result, sometimes use a thin book or any other thin and hard object with right angles. It is placed between the legs, pressing one side against the wall, strictly vertically, and bringing it closer to the pubis. The beginning of the measuring tape is placed on the top edge of the book.
The measurement is adjusted to suit the trouser model or wearing style. The wider the trousers, the longer they should be. Tight-fitting styles may expose the ankle. For a specific pair of high-heeled shoes, you need to select trousers separately - a length that reaches the middle of the heel looks harmonious. The difference with trousers for flat shoes can be up to 10 cm.
0
