When purchasing trousers in stores or markets, you may be faced with the need to shorten them. This is especially common for short people. To do this, it is not at all necessary to contact a studio and pay money for it. Eat An easy way to learn how to adjust the length of trousers to the required size is to use adhesive tape.
Which trousers can be taped with web tape?
Adhesive tape cannot be used on all types of fabrics. For example, her not recommended for use when shortening knitwear, since such fabrics are elastic and may lose their softness and stretchability. Also It is better not to use tape on thin fabrics. It can compact the fabric, creating unnecessary volume. Concerning expensive fabrics, then it is better to entrust the work of shortening products to a professional in order to be guaranteed not to damage the product.
Most other types of fabrics are easy to tape.
REFERENCE! One of the significant advantages of using gossamer is that the threads will not be visible on the front side of the trousers.
How to roll up pants using a spider web
Even without experience in sewing, trousers can be shortened and hemmed quite professionally. To do this, you need to follow processing technology and simple recommendations.
One of the first and main pieces of advice would be to wash your trousers., since after the first wash the fabric may shrink, and the length of the trousers will change downward. Despite the fact that many clothing factories carry out wet-heat treatment of products before sale, it is always better to be on the safe side.
Preparing for work
- Fitting. First you need to understand how many centimeters you need to shorten your trousers. To do this, the person who will wear them in the future must wear them. Be sure to straighten your pants at the waist to get the correct measurements. Ideal if they reach the middle of the heel. You can also use regular pins, fastening the bottom with them at the desired height. For example, when putting on trousers on a bare leg, the fold will touch the floor. If you can’t try on your pants, then any trousers from your wardrobe will come to the rescue. It is enough to put them on top of each other and determine the length.
ADVICE! It is good if another person acts as an assistant and marks the required length with chalk.
- Drawing a fold line on trousers. Place the product on a table or other flat surface. Use a bar of soap or chalk to mark the fold line and check that the hem line is perpendicular to the side seam of the pants.
- Hem allowance mark. To do this, you need to step back 4 cm from the previously outlined line and also draw a parallel line.
- Excess length cut. Along the bottom drawn line you need to cut off the excess fabric.Next, the product is aligned at the waist and placed on the table surface with the cut leg up. The length of the second trouser leg is shortened, focusing on the first.
- Processing the bottom cut. If you have an overlocker or a sewing machine at your disposal, you can properly process the bottom cut. You can also do this manually using a simple overlock stitch. This will prevent the threads from fraying.
- Ironing hem of trousers from the inside out.
How to properly use adhesive tape for trousers
Adhesive tape or web is a special textile product consisting of thin fibers. In the sewing industry, it is an auxiliary material for adjusting the bottom of clothes. Manufacturers produce it in the form of a roll of various thicknesses, usually from 0.5 to 5 cm.
ATTENTION! If the web is wide, then it can be cut, thereby obtaining the desired width.
Paper web
There is a tape on sale that is glued to a paper backing. A web based on this type has a significant advantage over a regular one. The fact is that it is very difficult to place it so that it sticks in the right place. It is much easier to do this if it has a paper base.
A web is placed in the hem and ironed again at high temperature. Therefore, you should heat the iron well. After this, the web should melt and the fabric of the trousers will stick to it. If it doesn't stick quickly, you can spray the fabric a little with water and then repeat the procedure.
When using paper-based tape, you need to know certain points that need to be taken into account:
- First, it is placed with the adhesive backing on the fabric and the paper facing up from the inside out.
- Iron the paper base with a hot iron. Once everything is glued, you can remove it.
- Next, make an even hem so that it overlaps the adhesive tape by a few millimeters and iron the hem. The process is completed, and the trousers can already be worn.
Some useful tips
- Practical use shows that the web can come off after several washes. In this case, you just need to do the above processes again. This must be taken into account and, if possible, apply adhesive tape to products that are less susceptible to washing and have less contact with water.
- When washing items with cobwebs, avoid high temperatures.
- There are unpleasant situations when, during the ironing process, the adhesive composition remains on the iron. A small piece of cloth soaked in an alcohol solution will come in handy here. It removes glue residue perfectly. To avoid staining the iron, it is recommended to use a thin cloth or gauze. This way, the iron will be protected and will not have to be cleaned.
The web is very easy to use and is an indispensable material. We hope that this article will help you properly shorten your pants in a simple and convenient way.
0
