How to fix a zipper on a jacket

A zipper is a fastener that is found on many types of clothing and is also used on shoes, bedding and bags. Sooner or later, everyone faces problems with their locks. Whether the lock has been used for a long time, an initially low-quality product, or problems that can be solved - we will figure out the cause of the breakdown and how to solve it.

First, let's figure out the cause of the breakdown.

Before you begin repairs, you should find out what the key problem is. Perhaps it can be solved at home without the cost of professional repairs. Among the most common causes of lightning failure:

• a weak slider that cannot connect the lock teeth together, causing the zipper to come apart;
• the slider is too tight, causing the zipper to jam and not fasten or fasten too tightly;
• divergence of the zipper after fastening. Just as in the first case, the problem lies in the weakness of the slider.

How to fix a zipper depending on the cause of the breakdown

All of the listed problems with the lock can be solved at home and do not require a complete replacement of the lock. Repairs may require pliers, lock lubricant, a slider, and paraffin.

Attention!

In addition to the fact that the slider can be purchased in specialized stores, it can also be removed from unnecessary old locks or clothing. Focus on the required size.

What to do if the lightning gets stuck

If the zipper jams, stops moving, or breaks the lock teeth, then the reason may be high friction. The issue can be easily resolved - the lock needs to be lubricated. In specialized stores you can purchase lubricant designed specifically for runners. If this is not possible, then you can use any means at hand, for example, a piece of unsalted lard or paraffin. Paraffin does not leave the same residue as lard, so it is preferable.

1. Rub the zipper while closed with a piece of paraffin, being careful not to damage the teeth.
2. Fasten and unfasten the lock several times.
3. Remove excess paraffin with a napkin.

After these actions, the lightning will not jam and will last for a long time.

What to do if the zipper on your jacket comes apart

The problem with a weak slider is the easiest to solve and does not require replacing the zipper. Straighten the zipper and try to fasten it. Ideally, the slider should move smoothly, without effort. If the zipper comes apart, try lightly pressing the slider with pliers; if this does not help, then increase the pressure.

Important!

If you press the slider too hard, then all you have to do is throw the zipper away. Therefore, move carefully, step by step, increasing the pressure.

What to do if the base of the zipper is broken

If the lower part of the lock is broken to such an extent that it seems shaggy, then it is better to replace it - such a lock will definitely not last long.However, you can extend the life of the base of the lock, which is especially important if you currently do not have the time or opportunity to change the lock. For this we need a simple nail polish, it is better to choose a colorless one or one that matches the color of the lock. Unfasten the lock and carefully reattach the torn parts, then apply nail polish to them. Please note that it is impossible to get by with just one layer; the varnish must saturate the lock well and, when dry, tightly glue the broken parts together. Dry the lock thoroughly before use.

Note!

If the option with nail polish is not very attractive to you, then you can use superglue in a similar way.

How to replace a zipper slider on a jacket

If all else fails, then the only option is to replace the slider. You can either buy a dog or remove it from any old thing, the main thing is that it is the same size as the previous slider. Procedure:

1. Remove the broken slider. Be careful - the teeth break easily - first lift one part of the pawl, then release the second.
2. Open the edges of the new pawl in the same way, but do not overdo it so as not to break it. You can use a thick needle or scissors.
3. Place the pawl on the lock and gently press it with pliers.

Carefully!

Pressing too hard can break the pawl, while too little will cause the lock to constantly come apart. Proceed with caution.

After installing the new slider, open and close the lock several times, making sure that the pawl moves smoothly and that the lock does not come apart.

How to replace a zipper on a jacket

Replacing a lock on a jacket is quite difficult for the average person, especially if you have not done this before. It’s best to take a padlock or jacket and bring it to a sewing store so they can pick out a padlock based on color and size.. At the same time, the old zipper is torn off, and the new one is sewn in its place using a machine. The top edge is cut in proportion to the length. However, if you are not confident in your own abilities, then it is best to turn to a professional seamstress.

Repairing a lock or slider is quite simple - there are enough available tools for this, and you can do it at home. However, not all methods are long-term; in some cases, the castle cannot be saved. Therefore, you should not delay replacing the zipper, so that later it does not let you down at the most inopportune moment.