Replacing a zipper on a down jacket

Almost every person has a warm and comfortable down jacket in their wardrobe, regardless of age. Children and adults love it for its extraordinary practicality and comfort, so an unfortunate breakdown of a zipper at the most inopportune moment always becomes an unpleasant surprise. Replacing it yourself is not difficult - you just need to take into account some features.

Replacing a zipper on a down jacket using the standard method

When steaming the lock, you need to be careful about the integrity of the down lining. The product from Chinese manufacturers requires the down to be fixed behind the lining.

Required tools:

• ripper;
• paper cutting knife;
• scissors;
• sewing needle and threads of suitable colors;
• sewing machine.

The standard procedure includes the following steps:

1. Carefully remove the fastener and disconnect the fasteners.
2. Clean the edge of the garment from any remaining thread.
3. Cut the purchased zipper exactly to the size of the old one.
4. Remove excess cloves with pliers.

Important! Only metal or plastic tractor links can be removed.The spiral ones are thoroughly flattened with a hammer and hidden under a cloth.

5. Fasten both tracks at the ends using fasteners.
6. Pin along the inner side of the down jacket, starting from the bottom to the top, aligning with the notch.
7. Sew on a sewing machine.

Important! The seam is placed exactly along the old stitches to hide the left ones. needle holes.

8. Sew the fastener to the other side in a similar way.
9. Place the top of the placket over the zipper, pin it and stitch it.
10. Fasten the pawl, mark the joints of the parts with chalk, combine them with the opposite ones and machine stitch them.
11. Check the symmetry of the joining marks and complete the finishing.

How to replace a zipper on a down jacket without ripping out the seams

For those who doubt their tailoring abilities, there is an easy and time-consuming option. It will help you quickly deal with the problem that has arisen and will not damage the product.

Required:

• new zipper;
• pliers;
• lighter;
• safety pins;
• sewing threads of a suitable color;
• sewing machine.

Step-by-step instruction:

1. Cut off all links and fasteners from the damaged lock with pliers.
2. Clean the fabric tracks from plastic residues.

Important! If nylon braid is damaged, it is secured by lightly melting the edges with a lighter flame.

3. Try on a new lock, remove excess from the top edge, and melt the cut with fire.
4. Unfasten the pawl, place each side on the cleaned base as close to the toothed track as possible, and secure with pins.
5. Machine stitch along the very edge of the old base.
6. Fasten the lock and attach its free part to the base of the other side.
7. Lower the slider and stitch the part in the same way.

Important! To ensure an even seam, the slider should first be moved above the sewing foot, and then moved lower, raising the needle up.

Thus, sew in Making a zipper into a down jacket with your own hands is not that difficult—you just need to show a little patience and have some basic tailoring skills.