How to sew a shirt

All More fashionistas and fashionistas are switching to online shopping. Specified parameters volumes do not always correspond to those specified in size tables and diagrams. Therefore, it is very easy to get into trouble by ordering something without trying it on. If such an embarrassment occurs, but there is no possibility of a return and the money has been paid, there is nothing else remainshow to give away new clothes in the studio, in hand milliner.

If you are at least a little comfortable with a needle and thread, it will not be difficult for you to sew up clothes with your own hands. Besides, this is a significant saving, and will take The process takes very little time. Let's look at the example of a shirt.

What you need for work

So, let's prepare the ground for sewing. You will need:

• Needle of the required thickness.
• Pins for securing parts.
• Sewing machine (if you have one).
• Threads matched to the color of the product.
• Scissors, preferably sharpened ones.
• Centimeter tape for measurements.
• A bar of soap or chalk for drawing.

Options for sewing shirts

Next, you need to decide what exactly needs to be done.To do this, you need to turn the shirt inside out and try it on the person who will her wear. Attentively inspectwhat doesn’t fit correctly, where it’s too big, clarify the nuances according to the sensations (pressure, too spacious, long sleeve, etc.). When all technical issues are resolved, we proceed to aesthetic ones.

Reducing your shirt size step by step

In order to change the size, you need to very accurately and carefully mark the excess areas of fabric for further trimming. The prepared pins will come in handy. What are we doing:

• The material is collected along the length of the seam using pins, making sure that it is even. Sloppyness will lead to fabric deformation.
• When all the seams have been checked and the silhouette is ready, remove the shirt from the person trying on and begin trimming the excess areas. For convenience during subsequent wear, the edges can be stitched using a sewing machine.
• Upon completion sewing and fitting ready-made, steam using an iron stitched edge and it's done.

How to sew a shirt at the waist. detailed instructions

There are two options here, depending on which manufacturer made the product. If this is European quality, then suturing the sides cannot be avoided. If you would just like fit shirt, the seam along the back can be shaped like an arc. Let's get started:

• Trying on clothes.
• We pin the fabric along the back seam, from bottom to top. Leave the waist slightly rounded.
• You need to pin the material at the waist a little higher, about 20 cm.
• The seams (old and new) must be as precise as possible, even and transition smoothly into each other.
• Trim off the excess with scissors and sweep up the edges.

If you come across an item without such a seam, you can make darts slightly below waist level.

How to sew in the sides of a shirt. Step-by-step instruction

To reduce the size at the sides, but there is no possibility of trying on, you need clearly know the parameters of the person who will her wear. Measure your waist and chest circumference with a tape. Depending on the length of the product, just in case measure your hips. How we organize the work:

• A piece soap or chalk for drawing, you need to mark the size you need on a table with good lighting.
• Be sure to draw the lines of the side seams.
• Collect material using pins.
• Use a sewing machine to stitch these seams, trim off the excess.
• Sew the edges of the fabric.
• The final stage is ironing the product.

Sewing the shirt at the shoulders

How to properly cut the product at the shoulders:

• Measure the desired sleeve length.
• Draw a line on the shirt.
• Check carefully whether the drawing is straight.
• Open the seams at the sides.
• Using sharp scissors, carefully trim off any excess fabric.
• Use pins to secure the side seams and machine stitch the sleeves, preferably with a double stitch.
• Ironing is a mandatory process.

Sewing the armhole of a shirt sleeve

If the task is to make the armhole smaller, the first thing we do is steam the sleeves. Estimate the width opening, use a needle to select the desired area and carefully hem the required amount of fabric. When this is ready, you can start stitching on the sewing machine. Sew on the sleeves and try them on. Remains Just smooth it out and wear it.

Shorten the sleeves. Step-by-step instruction

What to do if you need to shorten sleeves with cuffs:

• Measure length from shoulder to cuff.
• Back off a little if it turns out to be short.
• Take measurements with tape.
• The cuff line is transferred to the drawn area.
• Use small scissors to trim off excess material.
• Sew the cuffs to the sleeve.

Shortening a shirt, instructions

This process is one of the most lungs, even a novice seamstress can handle it. You don't even need to have a sewing machine. You can hem the length using a needle using neat stitches. What are we doing:

• Determine the length you need.
• Draw a line with chalk.
• Swipe calculationshow much fabric needs to be trimmed. Add one and a half centimeters to the measurements obtained.
• Carefully cut off the excess and pin it with pins.
• Stitch or hem by hand.
• Iron the finished product.

Important! If you bought an item that did not fit, before sewing her yourself, see if you can do it neatly. If you have no experience in cutting and sewing, it is better to entrust this matter to the hands of a master in the atelier.