All women dream of a beautiful mink coat. It allows you not only to stay warm, but also to look impressive. But don’t forget that you need to take care of your fur coat. Cleaning it must be approached with complete seriousness, since one wrong movement can ruin the product. Many people believe that this procedure should not be performed at home. There are several ways that will quickly and efficiently remove yellowness and unwanted dirt.
Abrasive materials
This option is perfect for light stains. If the item is a little dusty, it is best to use sawdust from non-resinous trees. First they need to be soaked in alcohol. Then apply it to your fur coat. You can get rid of the remaining sawdust using an ordinary brush.
Talc
Talcum powder cleaning works best on light-colored fur. You can also use semolina in exactly the same way. The fur coat must be placed on a flat surface and spread evenly.It is better to carry out this procedure with gloves, since the talc remains on the hands. After which you need to generously sprinkle the entire fur with talcum powder. Next, rub in the talcum powder with light movements. At the end of the procedure, you need to shake the item and remove any remaining talc with a brush.
Attention! Flour and starch are not suitable for this cleaning option! They will become clogged in the fibers of the fur and will swell when water gets on them. This will definitely ruin your product.
Wet cleaning using shampoos
This method is perfect for more serious stains. Add a good shampoo to warm water and stir until foam forms. After that, this foam must be applied to the fur using a cotton pad and rubbed in a little. Next, rinse off the remaining foam with clean warm water and dry the fur with a napkin. You can use vinegar with peroxide in the same way, but you should be careful here.
Cleaning the lining
The lining of a fur coat often gathers dust and acquires an unpleasant odor. Cleaning it is not as easy as fur, but it is possible. For cleaning, you can use two options. Remove the lining or carefully clean the lining on the product. For small stains, the second option is suitable, but for large, stubborn stains, you will have to tear the lining off the base.
Next, the lining is cleaned with a sponge and soap solution. Gently rub the soap solution into the lining. After which it must be rinsed with clean water and dried with a napkin.
What not to do when cleaning fur products
Cleaning your fur coat is often not recommended. Due to constant washing and cleaning, the fur coat will quickly become unusable. Therefore, you need to wear fur products carefully so as not to get them dirty again.
Mistakes when cleaning fur are made quite often. One of the biggest mistakes is cleaning a fur coat with powder and soap. For cleaning, you can only use foam, but under no circumstances should you rub the product with soap, much less cover it with powder. The powder will definitely get stuck in the fibers and will be difficult to remove with a brush.
Using flour and starch when cleaning stains is also a common mistake. Thus, some try to replace talc or semolina, but this method is not suitable. Flour and starch remain on the fibers. After which, when exposed to water or snow, they swell. This problem will be difficult to get rid of, so it is better not to make such mistakes.
All girls love to look beautiful in fur coats, but do not forget that such things need to be looked after. Otherwise they will spoil quickly.
0
