Sew men's jeans with your own hands: pattern, diagrams and description

There is probably not a single person who has not owned jeans in their life. If earlier it was work clothes, now jeans can be found everywhere, even at social events.

How to sew men's jeans with your own hands? At first glance, it seems that this is impossible to do without professional equipment. To some extent this is true. With a household sewing machine, you will not be able to sew such thick seams as real jeans have. But you can take a thinner fabric. And there is nothing complicated in the cut of the jeans - ordinary trousers, but with decorative seams.

Men's jeans pattern

We calculate the amount of material as follows: trouser length + 40 cm and + fabric for pockets. It is advisable to wash the fabric itself before starting work, dry it and iron it. Prepare thick threads - red or mustard.

The pattern for men's jeans is presented in the article or can be found on the Internet.

So, we put the pattern on the fabric and cut out the details of the future jeans.

The sewing master class is as follows:

1. We sew together the back and yoke of the trousers. We process the fabric sections with an overlocker. We make a decorative seam at a distance of 1 mm from the stitching seam. We lay the second seam at a distance of 6 mm from the first.
2. Sew the two back halves together. Let's put it off.
3. Preparing patch pockets. We make the necessary lines on them.
4. Mark on the jeans where to sew the back pockets. We attach them first with one line, then with a second one.
5. Assembly of front parts:

We assemble all the parts of the front pockets;

We sew the facing to the left side;

Insert the zipper;

We make a rounded stitch on the codpiece using two seams.

1. We combine the front and back parts of the product. Sew the crotch seam with two lines. We turn the side seams towards the back and also sew them with a double seam.
2. We are preparing the belt loops. Cut a strip of fabric 0.5 m long and 3 centimeters wide. We put the edges under overlock. Iron from the inside out, connecting the two sides of the strip to the center. We sew it on both sides along the front side. Cut into 5 small belt loops.
3. We attach belt loops: two - near the front pocket; two - at a distance of 3 centimeters behind the side seam and one - on the back central seam.
4. Sewing a belt. We take the width of the blank for the belt equal to 10 cm, and measure the length according to ourselves.

On one wide side, fold and iron 1 cm of fabric. We attach this side to the jeans, insert a grosgrain ribbon for rigidity, turn it in and hem the waistband.

1. Sew on the belt loops. Using an iron, iron each piece 2 centimeters on one side and 1 centimeter on the other. First sew 2 cm below the belt line, then 0.5 cm at the top.
2. Punch through the button and make a loop.
3. All that remains is to roll up the legs and our jeans are ready.

An important issue is the selection of fabric. Choose material dyed with natural dyes. Otherwise, your jeans will stain your underwear, shirt and body with paint. When purchasing material, you can test it by running a damp cloth over it. There are no traces of paint left - you can take it.

Please note that with a high content of elastane in the fabric, it will stretch greatly over time.

If desired, you can install rivets on the jeans. This is not difficult, but is done using a special clamp and a hammer. Rivets are placed at the corners of the pockets. They serve not only as decoration, but also as a reliable fastening for places prone to tearing.

As you can see, sewing jeans with your own hands is a task within the reach of everyone. The main thing is to perform all stages of sewing accurately and accurately.