How to remove blinds from a window to wash

The blinds are impregnated with an antistatic compound so that they do not collect dust. But you still need to remove them from time to time to wash them. To avoid deformation, the slats in the structure cannot be bent or pulled.

How to properly remove vertical blinds

• free the window opening from curtains or tulle;
• we roll up the chains and cords, tying them with a cord. Otherwise they may break or get tangled;
• we assemble the blinds on one side;
• we remove weights (weights) from the lower fold of the lamellas;
• remove the chain;
• carefully take the lamella by the top, lift it slightly even higher towards the cornice;
• turn your hand towards the slider, you should hear a click and the eye will come off the hook.

Important: It’s better to do this work from a stepladder so that your arms and body get less tired. Fabric lamellas are rolled up. Slats made of hard material (wood, plastic) are carefully folded so that they do not scratch each other.

How to remove horizontal blinds from a window

Instructions for removing horizontal blinds from windows:

• remove the covers that hide the fasteners in the upper part;
• take a screwdriver and unscrew the screws;
• the blinds should be supported by hand while unscrewing;
• if the structure is supported by special clamps, then it is enough to simply remove the curtain from them; At the same time we hold it with our hand.

If it is not possible to remove the lock, the blinds can be removed from the window along with the fastenings (brackets). We arm ourselves with a screwdriver and a hexagon and remove them from the corner on which they are attached.

After the product is removed, it is recommended to disconnect the slats from the box.

How to remove and disassemble roller blinds from a window

The design includes: fabric canvas, cornice (open or closed), control mechanism and chain.

How to properly remove such a curtain from a window:

• remove the bar at the bottom;
• roll up the canvas.

After this, you should understand how roller blinds are attached. If these are self-tapping screws, then just use a screwdriver and unscrew them. When attaching the structure using a bracket, it is necessary to remove the side plugs. We take the edge that is opposite to the place where the chain is attached, find the gears there and pull them out. Move the cornice to the side and carefully remove it from the pipe.

If the structure is secured with adhesive tape, then carefully remove the tape with a knife, and remove sticky traces with alcohol or vodka.

The magnetic mount can be easily removed without any tools.

How to remove horizontal aluminum blinds

Such curtains can be secured using bolts, plugs or side clamps. If these are bolts or fasteners made of metal, then you should remove them using a screwdriver. If the blinds are secured with decorative plugs, then you need to remove them, remove the clamps by pulling them towards you, then to the right.

After this, all slats are carefully removed. Detailed information can also be found in the assembly instructions. Therefore, you should not throw away documents immediately after purchase.

How to disassemble and wash roller blinds

The fastening of such curtains is magnetic; can be performed in the form of gluing onto adhesive transfer tape. Sometimes the roller is hung on brackets or hidden in a cassette.

• the first step is to wind the fabric onto the shaft;
• if the mount is on magnets, then snap them off;
• When gluing with Velcro, carefully remove the tape using a knife and carefully remove the frame. We wash the canvas and clean the wall surfaces with an alcohol solution.

If the hanging is done on brackets, then you need to understand the design of the holder.

Cassette varieties

• First of all, we snap off the plugs at the edges;
• remove the gears from the opposite edge of the chain;
• the shaft pulls to the side;
• carefully remove the canvas from the pipe;
• remove the bar at the bottom.

Washing roller blinds

It is best to clean with a vacuum cleaner. If the canvas is made of thick fabric, then it can be wiped with a sponge or washed. The washing water should not be hot; a little powder should be poured into it. The fabric cannot be wrung out or twisted and can only be washed by hand. It is better to dry it on a horizontal surface. For heavy stains and areas that are difficult to wash, it is recommended to dry clean the fabric.

Washing and washing slats

The process of washing and washing directly depends on the material from which the slats are made.

• aluminum. Easy to clean, not afraid of detergents. You can also wash it on the window, wiping it with a rag or a brush with attachments. In case of heavy contamination, the lamellas are removed, soaked in a bath and washed with a brush;
• plastic. Caring for plastic is similar, but they are more fragile, so wash and wipe them carefully;
• wood (bamboo). Such slats can only be cleaned with a dry cloth or vacuumed. For wet cleaning, special wood products are recommended. If an antistatic agent is applied to the surfaces, do not wipe them with a damp cloth or napkin;
• textile. Such slats can be wiped, washed in warm water, vacuumed and washed with a special brush. You should not wash it in an automatic machine, so as not to lose the attractive decorative appearance.

Washing methods

• Aweigh. Suitable for light stains. Disadvantage: dirty stains on the frame, glass, window sill;
• washing slats in the bath. All slats are removed, soaked in warm water, carefully rinse off the water and hang to dry. Do not rub or wrinkle the fabric;
• washing with a sponge followed by rinsing from a shower head.

It is important to remember that blinds need care and need to be washed, cleaned or vacuumed from time to time. But before this procedure, it is necessary to properly remove the structure so as not to deform the lamellas or break them. To do this, it is recommended to follow the above rules.

And so that the lamellas do not deform during washing or wet cleaning, they are not wrung out, twisted, or ironed. Dry them only on a horizontal surface and do not wipe off dirt so as not to damage the impregnation or fray the edges of the product.