A tool bag is a must for anyone doing repair work. And this is just a very convenient way to store everything that is usually kept separately. This bag is necessary for installers, mechanics, motorists and even needlewomen. You can make it yourself by drawing up a pattern depending on the number and nature of the tools. For example, for sharp ones you will need a hard cover to prevent the fabric from being cut through. But before that, you need to decide whether it will be a foldable fabric, for a belt or on a belt. The best option is a belt bag: it’s roomy, doesn’t take up your hands while working, and can easily be turned behind your back so it doesn’t get in the way.
What you need to make a tool belt bag
A homemade tool bag should be comfortable, as spacious as possible and suitable for the type of work being performed. The first thing you need to decide on is the materials. The fabric can be ordinary, but then you will need to sew thick paper in order for the product to keep its shape.In addition, you should take into account the durability of the fabric - it will be unpleasant if something made with your own hands quickly breaks.
Advice! It is recommended to use nylon or leather - this is a dense, strong material that is highly resistant to tearing or contamination.
There are three different types of materials for sewing bags: leather, leatherette and nylon. In rare cases, canvas fabric is used, but provided that the instruments are not sharp or are protected by covers.
The most affordable and versatile material is leatherette. However, the leather will be much stronger and easier to find. For a belt bag, you can alter an old briefcase or a woman's handbag - as a more suitable option than creating your own pattern.
Nylon is also accessible and versatile, has a lower cost and is therefore used much more often. Nylon bags are lightweight and do not require special care. They are easier to wash and clean than leather ones, which is especially important if you work with oils or other lubricants.
Another option is fabric-based oilcloth. It is also dense, inexpensive, and you can quickly sew a product from it without much expense. The cheapest option in terms of cost, you can also practice if you have no experience. But if you count on durability, then it is better to use leather.
Important! Leather is the best choice for making a durable tool bag.
The second thing you need: tools. You will need the following set:
- thick needle;
- strong threads;
- scissors for cutting out patterns;
- chalk or soap for marking lines on the pattern;
- sewing machine.
As well as the chosen fabric, zippers and metal rivets.
First, the pattern is cut out, after which all the parts are sewn together to form the finished product.If everything is done correctly, the bag will most likely last a long time.
How to make a tool bag for your belt with your own hands
Pattern for the lightest model: just two or three rectangles sewn into one piece. Separate pockets for small parts are also taken into account.
Important! You should think in advance about the location of the departments, the number of pockets, the type of fastener, etc.
Sewing process:
- Cut out the pattern, leaving enough seam allowance.
- Hem the cut pieces to strengthen the edges. To do this, you can use fabric tape or overlap it with twine.
- Sew on a fabric belt that is wide and long enough to tie around your waist.
- Mark two pockets on the main apron, pinning the cutouts with pins.
- Inspect and try on the assembled parts, checking for ease of getting out the tools.
- Sew pockets.
The main thing you need to count on is the volume of the product. But you can’t stuff it all the way to the edges, otherwise the fabric will tear. The tools will pull it down, pulling the belt. The second is the functionality of all branches. It is important that they fasten so that small parts do not fall out, or remain open if necessary in order to get tools. You also need to choose the color of the material so that dirt is not visible.
Recommendations for making a tool bag
The main recommendation is to choose a non-marking, soft material so that even sharp objects can be easily placed in it. Lack of contamination is especially important if the main purpose of use is repair or construction work.
In addition to the belt, it is recommended to equip belt loops.You can put a regular trouser belt through them to make it convenient to hang the bag on your belt if long waist tails are not too comfortable. This way it will take a compact shape when hanging, but remain roomy.
The tool bag is quite simple to make, considering the strength of the material and using all the tools.
0
