Velor material for shoes

The popularity of velor shoes is due to their beautiful and rich appearance, stylishness and originality of the models. It will emphasize the nobility of the image at a social party, when visiting a theater, a club or a celebration in a restaurant. Well suited only for walks in dry weather, does not like rain and snow, and requires careful care.

About natural velor

From it they produce:

• clothes - trousers and skirts, jackets and blazers, short coats and coats, jackets, etc.;
• bags of all sizes and colors;
• shoes for all seasons - shoes with heels and flat soles, moccasins, shoes, boots, ankle boots, etc.;
• haberdashery goods – belts, cases, jewelry, etc.

What is velor fabric in shoes?

This is the name of tanned natural leather with thick, fine pile on the surface, which is longer than that of nubuck, but shorter than that of suede. The material is also called chrome suede and is made from thin tanned skin of young calves no more than one and a half years old, leather with defects on the front part (merei) and chevro.

The velor layer is obtained by sanding the leather from the reverse side (bakhtarma), i.e. it is also called “bakhtarmyany”. Besides it there is:

1. “Fur” is leather made under a velor base, covered with fur, the so-called “sheepskin.”
2. “Split” is a layer of leather without a front surface, used for the manufacture of clothing and shoes.
3. “Face velor” – sanded with an abrasive cloth, which gives the material a resemblance to nubuck.

It is characterized by high wear resistance and a unique appearance, but is vulnerable to humid environments, chemical compounds, dirt and dust.

What is the difference between velor and suede

Let's look at the differences in materials in the table:

Parameter	Velours	Suede
Skin type.	Dense small skins of pigs, kids and cattle.	Skins of elk, deer, sheep and other small animals.
Processing method.	Chrome tanning.	Fat tanning.
Features of grinding.	From the wrong side.	At both sides.
Skin pores.	Invisible.	Well visible.
Seam processing.	With a hem.	No fold.
Smell.	Doesn't smell.	Smells like leather.
Surface.	Velvety on the outside of the material.	Velvety inside and outside of the shoe.
Color.	Homogeneous.	Traces of a different shade remain when ironing the pile in different directions.
Prints	They remain.	No.
Resistance to environmental influences.	It quickly gets wet, dirty and dusty.	Resistant to any impact.
Strength.	Low tensile strength.	Increased ductility.
Price.	Cheap.	Expensive.

How to care for velor shoes

Manufacturers offer to purchase special protective agents along with a pair of shoes, which are applied immediately after purchase and left until the composition is completely absorbed.It is recommended to repeat the procedure at least three times, which will create reliable protection against moisture penetration.

A mixture of wax and fat is known from folk remedies, which is used to treat seams and the outer surface.

Snow, dust and dirt must be shaken off immediately upon entering the room with a special brush, preventing their penetration into the product. For cleaning, you can use a soft cloth, shoe brushes with natural bristles and an ordinary eraser. The sole should be washed so as to prevent water from getting on the velor fabric. Otherwise, unsightly stains will quickly form on it, which spoil the appearance and reduce its service life.

A spray foam cleaner that is applied to stains and removed after it has completely dried will help deal with stubborn stains. It is recommended to dry wet shoes using special shoe dryers or newspapers, which should be changed regularly. It is not advisable to place boots close to heat sources to avoid deformation or damage.

In winter, salt stains often form on the surface of the material, which can be quickly removed using a piece of cloth moistened with a solution of water and soap or washing powder. Don’t forget about waterproofing agents that are applied after each shoe cleaning.

How to wear velor shoes

The high quality of the material ensures a long service life with proper care and careful handling of shoes or boots. You can update the appearance and smooth out the wrinkled pile using a water bath, holding the shoes over the steam for several minutes and gently wiping them with a piece of cloth or a brush. To preserve color, it is recommended to use special creams or coloring compounds in aerosol cans.

The beauty of velor products can delight their owners for many years if they are provided with timely and proper care. They will emphasize the attractiveness and elegance of the suit, giving confidence and impeccability to the entire appearance.