Knitted square armhole: diagram, pattern and step-by-step description

sdelay.sam.ua

The square armhole style is very common when creating folklore dresses. This armhole is special in that its lower level is represented by broken lines. When the sleeve is lowered, the fabric falls, creating several beautiful folds under the arms. A sweater with a square hole for the sleeves has a special shape, which can be determined by the amount of increase. Craftsmen add fabric to the volume of the chest, to the width and depth of the neckline itself. Shoulder sections of different sizes can be used. In such models there is no fit along the edges. In some cases, the square armhole is based on patterns that have set-in sleeves.

Square sleeve armhole - how to build it

For square cutouts, it is customary to make a significant recess. At the same time, there is a large selection of single-seam and two-seam models of sleeves for clothing of this design. There are the following cut features:

• The size of the allowances is quite large - the products fit freely;
• The construction of the pattern is the basis of a knitted sweater with square armholes;
• Key answers from other styles are the absence of piping on the sleeves, a special lower cut line;
• Depending on the features of the pattern, the shoulder seam can be standard or extended;
• The dart is in most cases located in the armhole. She does not play a special role in the appearance of the outfits.

An armhole line should be drawn along the front and back. Cut parts from these parts. The size of the fragments depends on the measurements taken. They are cut into several equal intervals and connected to the sleeve. Before combining the parts, it is advisable to check them against the layouts and parameters in order to achieve the most beautiful fit.

Square armhole with knitting needles - features of the cut

knitting-club.com.ua

The square armhole is often used in products with shirt sleeves. The line at the bottom is broken, which makes the sleeve fashionable and original. This style is found on formal dresses, sweaters, and sportswear. When knitting, it is necessary to take into account the features of the style:

1. The sleeve cap can be filled or not - it all depends on the model.
2. The depth of the armhole is deep or standard. A deep square armhole is not made.
3. If the shoulder lines are shortened, the hem may have folds, gathering, and a top seam.
4. The length of the shoulder lines is standard, shortened, extended. Sometimes they move to the front of the product.
5. Increasing the volume does not necessarily require increasing it under the bodice if we are talking about a dress.

In order for the product to be symmetrical, it is important to knit clear lines and follow the sequence of loops. Particular attention should be paid to the corners of the lower level:

• On the layout, the armhole is retracted from the vertical to a certain value. It is displayed individually.
• In sportswear, the shoulder lines are lengthened. The minimum elongation is two centimeters, the maximum is four centimeters. Some designers use larger extension options - for example, six or eight centimeters.