A beautiful lampshade can give a room an elegant, original appearance. The overall atmosphere of the house largely depends on lighting. Therefore, creative people who have the time and desire to bring their imagination to life prefer to make a lampshade for a floor lamp with their own hands rather than installing a purchased product at home. This is a relatively complex but interesting process. The most difficult stage is the frame for the lampshade with your own hands - you will need a tool, certain skills and experience. However, everything can be learned. If you need help or advice, just look up the information on the Internet. When the base for the lampshade is ready, it’s time for creativity and imagination. An abundance of luxurious fabrics, decorations, original ideas and models allow you to create an exclusive lampshade for a lamp with your own hands. This product will delight the eye for many years.
How to make a lampshade frame with your own hands
The frame for the lampshade can be made in three ways. Let's look at each of them:
- Wire.To work with wire, you need to arm yourself with good pliers or wire cutters. The frame of any lamp includes two rings and connecting posts. You need to understand that the appearance of the product will depend on these two details. The number of racks is calculated based on the parameters of each ring. According to the standard, they should be at a distance of six centimeters from each other. The fastening option is selected in accordance with the type and thickness of the wire. The simplest way is to form a small hook, which, after adhesion to the base, is tightly clamped. Coarse sandpaper will help prevent the lampshade from wobbling. It is used to process the fastening area. This method is relevant for aluminum wire. Thick steel wire will have to be welded.
- Five liter plastic bottle. This is the easiest way to make a lampshade. You just need to cut off the top or bottom of the bottle, form a circle for the lampshade, and get rid of excess plastic. Cut out analogues of the posts and rings with a knife to form the layout. It is advisable to draw lines and slot marks on the bottle in advance. All that remains is to decorate the bottle. Don't forget to make a hole in the finished product to allow the heated air to escape.
- Wire mesh. The fine mesh is ideal for creating a beautiful cylinder-shaped frame. It can be installed on a night light, table lamp, or floor lamp. We cut the mesh in accordance with the parameters of the lampshade, roll it into a ring, and fasten the wire around the circumference of the posts. When cutting, it is better to leave the ends of the wire long in order to fix the lampshade later.
How to make a lampshade with your own hands - decorate a table lamp
There are several ways to make your own lampshade for a table lamp.An interesting product is made from ordinary knitting threads. In recent years, such models have gained particular popularity. A huge plus is that you can make such a lampshade with your own hands without a frame. How to make a lampshade:
- We inflate a standard balloon to the size of the lampshade;
- We dilute in equal proportions part of the water at room temperature and part of the glue;
- Wrap the balloon tightly with knitting threads;
- Before winding, all threads must be blotted with the prepared adhesive solution;
- After completing the work, leave the products to dry for six hours;
- Pierce the ball with a needle and remove it from the resulting lampshade. The fashion masterpiece is ready!
Another popular option is fabric shades for table lamps. The easiest way to make a stylish lampshade from fabric:
- We choose a material suitable for the interior.
- We cut out a rectangle, taking into account the allowances. These will be used to hem the fabric.
- When making a pattern, take into account the width and length of the base.
- To make the fabric rigid and durable, we attach it to dublerin or self-adhesive paper.
- We roll up the resulting product, forming a circle.
- We connect the sections end-to-end and fix them with tape or glue.
- We put the lampshade on the base.
- We fix it with fabric folds on the lower and upper rings.
How to make a lampshade for a floor lamp with your own hands
Before you make a lampshade for a floor lamp, you need to form the wire frame yourself. Then paint it and dry it. The tape is used to wrap the warp rods. It should be made of cotton material. To make a neat lampshade with your own hands for a floor lamp, it is advisable to use a sewing machine. To work on the product you will need:
- Iron, sewing machine;
- Ruler, pins, pencil;
- Threads, fabric glue;
- Whatman paper or a sheet of craft paper;
- Fabric for lampshade.
The work begins with creating a pattern. The layout helps to cut the fabric correctly and calculate the dimensions. The length of the frame circle is measured. The corresponding segment is applied to the paper. The second segment is drawn in accordance with the height of the base. Two more segments are drawn connecting the length and height. The result is a completed rectangular pattern. Cut it out as a template. We check the dimensions before cutting the material. The paper is applied to the surface of the frame. If the size is larger, the layout should be adjusted. Further actions:
- We apply the fabric to the correct pattern with the wrong side and secure it with pins.
- We trace the outline of the template on the material. Make an allowance of two centimeters. This fabric is later folded inside. Mark the fold of the allowance with chalk or pins. We remove the pattern.
- The fabric is carefully ironed, otherwise it will not be possible to glue the crumpled material to the base.
- Using glue, we attach the canvas to the frame.
- We hide all places of cuts that have not been processed.
- When fixing the product on a metal frame wrapped in cotton, only the points of contact with the base are glued.
An original lamp - we make a lampshade for a lamp with our own hands
A lace lampshade will be a real decoration for any room. It is made by analogy with a lampshade made of threads. There are only a few differences. To work you will need:
- Knitted napkins - the same or different does not matter. Colors may also vary;
- Balloon;
- Wallpaper glue and a suitable container where you can pour it;
- Threads, brush, economical light bulb;
- One lamp socket;
- Several newspapers or a meter of oilcloth.
The size and transparency of the future lampshade depends on the number of napkins used. We work according to the following algorithm:
- We dilute one pack of wallpaper glue according to the instructions.
- Inflate and tie the balloon.
- We tie the ball at eye level or slightly lower.
- We lay down oilcloth or newspapers and lay out the first napkin.
- Carefully apply the adhesive solution to it using a brush.
- Place the napkin on the ball.
- Apply glue to the next napkin in the same way. We place it on the ball, a small part should fall on the fabric of the previous napkin.
- We do this with all napkins. We place them on the ball and lightly connect them to each other.
- There remains a small gap in the lower part - this is where the socket and light bulb are installed.
- We leave the product to dry for a day and a half.
- Check to see if the glue is dry. If the napkins are completely dry, pierce the ball and carefully remove it.
- To make a lampshade of a certain color, you can apply acrylic paints to napkins before piercing the ball. Then the product will need drying again.
- An electrical wire is passed through the top center point. Then the lampshade is connected and the light bulb is inserted.