Darts on a skirt: where to iron and in which direction, recommendations

natalibolgar.com

The dart is an irreplaceable detail that almost every pattern contains. With their help, products are modeled and a dress or skirt fits the figure. On skirts, darts narrow the models towards the waist. A special formula is used to determine the type and size of elements. The waist circumference is subtracted from the hip circumference. The resulting value is divided by 4 on products consisting of 2 fragments. In this case, the sidewalls should taper towards the top edge when cutting. The length is calculated separately.

Most craftsmen make 4 darts on skirts. A pair of rear parts are longer. The apex falls on the upper part of the gluteal muscles. The front elements are sewn shorter. The ending is on the stomach, at the top point. They do not differ in width. Only after this do the needlewomen decorate the products with belts. The use of darts is typical for skirts in a classic, business style.

With the help of such modeling, you can fit the dress, highlight the chest piece on the blouse, emphasizing the chest. The main rule is that any darts should be ironed. The temperature depends on the type of material, but in any case the procedure is carried out using a special technique.

Which way to smooth darts on a skirt - detailed instructions

Where to iron the darts on the skirt depends on their location and the nature of the model. To correctly complete this stage of work, you should follow a certain algorithm:

1. The skirt is laid out on an ironing board or flat surface. The front side is at the bottom.
2. The top of the fold should be at the edge of the surface, with the material hanging slightly.
3. The canvas must be completely straightened.
4. Material prone to deformation or thin can be lined with thick paper or cardboard.
5. The part is heated with an iron to a certain temperature. It is left to cool.
6. A pillow is placed on top to secure the direction of the dart.
7. If the fold is vertical, it is ironed towards the center of the skirt. An inclined or horizontal dart is often ironed upward.
8. The chest fold, which comes from the side, is also ironed upward. It is possible for spare material to exit to the armhole. In this case, it must be smoothed and cut along the stitch seam. The width of the remaining allowance is one and a half centimeters. Then the stitching is done.

Which way to iron darts on a skirt - how to make a dart correctly

sdelay.sam.ua

Most darts are ironed into the center of the product. When performing the final line, you need to move, tapering off. The fold should have the shape of an elongated triangle. The stitching starts from the waist and moves to the bottom edge along the entire length.The thread is secured with a neat knot, after which it is pulled inside the fold. A needle or crochet hook is suitable for tugging. How to smooth out the resulting dart:

• A special ironing pad is placed on the surface. The skirt is laid on top of it with the outer side down. A damp cloth is placed on top. It shouldn't be wet.
• We move the iron along the rag, starting from the waist, along the entire fold. There may be a slight bulge where the triangle is located. Circular movements of the iron on the cloth will help get rid of it.
• Similarly, you should work with each fold. You can re-wet the rag if it becomes dry. A spray bottle is best suited for this purpose.

If you work with breast folds, they are ironed from the top of the product to the bottom. The raised stitch should be ironed correctly in the middle. Afterwards, a finishing seam is used to process the outer part.